|
AC600 Series Ductless Chemical Workstations
The AC600 Series of bench top fume hoods provide a low cost solution for protection of laboratory personnel and the environment where manipulation of toxic vapors, gases, fumes and particulates are present. Designed and constructed from application specific plastics each bench top fume hood provides excellent application compatibility while maximizing operator safety. The AC600 Series is a ventless fume hood that requires no external duct hook up. Unlike traditional lab fume hoods the AC600 Series ventless fume hoods are easy to install and maintain.
Unique to AirClean Systems and the AC600 Series bench top workstation is a microprocessor controller that provides constant monitoring and adjustment of face velocity in addition to filter monitoring with electronic sensors and switches. AirSafe automatic safety controller displays the actual face velocity on the liquid crystal display to the operator and provides audible and visible alarms if the airflow reaches below an undesirable level for operation.
The AC600 Series benchtop fume hood offers exceptional visibility for both operator and observer due to the 360 degree clear design.
AC632TA Ductless Chemical Workstation
(tall version) pictured.
Standard Features:
- AirSafe™ automatic safety controller
- Integral base with deep spill lip
- Ventless Fume Hood - No ducting required
- Minimal installation - plugs directly into a standard 110V
or 220V electrical outlet Extremely quiet operation < 49dB
- All thermoplastic construction with application specific sash,
base and enclosure material
- Available in “low-profile” or tall version 32” or 48” widths
with nominal 24” depth
- UL, CSA and CE listed
Safety Features :
- AirSafe™ automatic safety controller
- Integral base with deep spill lip
- No ducting required
- Minimal installation - plugs directly into a standard 110V
or 220V electrical outlet Extremely quiet operation < 49dB
- All thermoplastic construction with application specific sash,
base and enclosure material
- Available in “low-profile” or tall version 32” or 48” widths
with nominal 24” depth
- UL, CSA and CE listed
AC600 Series Dimensions |
|
AC632A |
AC632TA |
AC632TAS |
AC648A |
AC648TA |
AC648TAS |
| EXTERNAL DIMENSIONS |
| Width |
32" |
32" |
32" |
48" |
48" |
48" |
| Depth |
25" |
25" |
25" |
25" |
25" |
25" |
| Height |
30" |
40" |
40" |
32" |
42" |
42" |
| INTERNAL DIMENSIONS |
| Width |
31" |
31" |
31" |
47" |
47" |
47" |
| Depth |
23" |
23" |
23" |
23" |
23" |
23" |
| Height |
20" |
26" |
29" |
20" |
24" |
27" |
|
 |
Options:
- Custom cart available in fixed 34” height;
storage shelf may be added
- Built-in polypropylene cup sink and drain
- Access panel for electrical cords
- Water and gas fittings
- Fluorescent lighting standard on all 48”workstations
and optional on all 32” workstations
- Polypropylene base cabinet
- Chemical disposal pump
|
Typical Applications:
- General chemistry involving small volumes of common chemicals
- Tissue staining and processing; e.g. histopathology, cytology
- Gluing operations
- Solvent cleaning of electronic parts
- Soldering applications
- School demonstration workstations
- Forensic applications - containment of fingerprint powders and
chemicals such as ninhydrin and cyanoacrylate
- Animal necropsy
|
|
AC600 Series Ductless Chemical Workstation Features 
AirClean® Systems portable polypropylene ductless hoods remove toxic particulate, chemical fumes or vapors protecting both the operator and environment. Polypropylene fume hoods, standard with a thermally fused integral spill tray, offer excellent chemical resistance during corrosive applications.
Folding Sash Version
 |
AirClean® Systems polypropylene lab fume hoods allow for a wide range of applications. Each polypropylene lab fume hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Polypropylene Ductless Hood Dimensions |
|
AC3000 |
AC4000 |
AC6000 |
EXTERNAL DIMENSIONS |
Width |
36" |
48" |
72" |
Depth |
30" |
30" |
30" |
Height |
56" |
56" |
56" |
INTERNAL DIMENSIONS |
Width |
35" |
47" |
71" |
Depth |
25" |
25" |
25" |
Height |
35" |
35" |
|
(Folding Sash Version) |
|
Features:
- Polypropylene construction for excellent chemical
resistant properties. The result - “NO MORE RUST”
which allows for longer service compared to standard
metal enclosures
- Wide range of activated carbon,
impregnated chemisorptive, and HEPA filters for
containment of virtually any toxic vapor, fume, gas,
and particulate
- AirZone™ baffling establishes a proper horizontal
airflow pattern and directs toxins away from the operator
in a predictable pattern, removing “dead spots” within
the enclosure
- No ducting required
- Integral vapor-proof fluorescent
lighting
- No installation costs. All AirClean®
Systems benchtop fume hoods are shipped completely
assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
Options:
- Vented and unvented polypropylene base cabinets
- Slip hatch electrical access ports
- Polypropylene sink and water fixture
- Duplex electrical outlets
- Sturdy mobile cart
- Metal or stainless steel liner
AirClean® Systems ductless hoods, workstations, and enclosures meet and exceed relevant OSHA and ANSI Z9.5 standards. |
|
Sliding Sash Version |
Features:
- AirSafe™ automatic safety controller
- Vertical sliding safety glass sash
- Dual wall construction allows for front mounting of services such as water, gas, or electrical outlets.
- Access to panels on either side of the hood enable field service of all fixtures.
FlowSmooth™ airfoil on sash lip promotes laminar airflow
- Polypropylene construction for excellent chemical resistant properties. The result - “NO MORE RUST” which allows for longer service compared to standard metal enclosures
- Wide range of activated bonded carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particle
- Integral vapor-proof fluorescent lighting system
- Available in 110V or 220V AC versions
- No duct required for operation
- Shipped fully assembled
Options:
- Sturdy mobile cart
-
Vented and unvented polypropylene base cabinets
-
Remote services - gas, water, vacuum, and air
-
Duplex electrical outlets
-
Polypropylene sink and water fixtures
- Slip hatch electrical access ports
|
Polypropylene Ductless Hood Dimensions |
|
AC3000S |
AC4000S |
AC6000S |
AC8000S |
EXTERNAL DIMENSIONS |
Width |
36" |
50" |
72" |
96" |
Depth |
30" |
30" |
30" |
30" |
Height |
60" |
60" |
60" |
60" |
INTERNAL DIMENSIONS |
Width |
35" |
44" |
66" |
90" |
Depth |
25" |
25" |
25" |
25" |
Height |
36" |
36" |
|
|
(Sliding Sash Version) |
|
Polypropylene Ductless Hood Features |
Back To Top
|
